에이치와이산업 - 신호발생기 ,HANDY CALIBRATOR ,신호발생기 , CA150

Multi-functional Hand-held Calibrator
Highly accurate within 0.02% of the DC voltage range for source and measure
Source and measurement can be performed simultaneously.
Vertical body with large-screen display
Loop power supply function (24 VDC at a load of max 22 mA)
It is possible to measure current in the mA range while supplying power.
Sink function
Sweep functions that allow 3 types of continuous outputs:
Step sweep function
Linear sweep function
Program sweep function

Specifications - Model CA150

Standard Accessories	None
Power Supply	6 AA size alkaline batteries AC adapter (sold separately) AC adapter specification: 100 to 240 VAC, 50/60 Hz, 1.4 A Dedicated NiMH battery (sold separately) OUTPUT: 12 VDC, 3 A
Auto power-off	Approx. 10 minutes; it can be canceled by setting.
Operating Temperature/Humidity Range	0 to 40°C, 20 to 80 % RH (no condensation)
Storage Temperature Range	-20 to 60°C 90%RH or less (no condensation)
External Dimensions	251 x 124 x 70 mm
Weight	Approx. 1000 g
Conforming Standards Safety	Softy EN61010-1 EMC EN 61326 Class B;EN 55011 Class B Group1 EN 61000-3-2; EN 61000-3-3, EN61326

Product Overview

Vertical Hand-Held Calibrator	Easy-to-hold vertical body is designed to make it intuitively easy to operate, as individual functions are accessed directly by pressing assigned keys. Using the main body case (model No. 93027) (sold separately), you can hang CA150 to your body or a handrail to keep it handy.
Simultaneous Source and Measurement for Process Devices	In conventional calibration applications, multiple devices such as a standard generator, dial resistor and multi-meter were required. Now with a single CA150 unit, it is possible to perform operation check at regular inspection and maintenance of thermocouples, RTDs and instruments, as well as maintenance and equipment diagnosis of process devices such as transmitters, thermostats and signal converters.
Loop Power Supply Function	It is possible to measure generated current signals while supplying loop power 24 VDC from a two-wire type transmitter (up to 22 mADC).
Highly Accurate and Multi-Functional Source and Measurement	High accuracy: 0.02% for the source unit and 0.02% for the measurement unit Source and Measurement functions: DCV voltage, DC mA, ohm, frequency and temperature (thermocouple, RTD) and 24 VDC power supply function for transmitters
Output Functions	Automatic Output Functions Step sweep function This function changes the output in a staircase (step) pattern at fixed intervals. Linear sweep function This function increases (or decreases) the output linearly with respect to the generated value. Program sweep function This function outputs source setting values stored by the data memory function sequentially in the order they are stored in the memory.
Communication Functions	Serial interface RS232 D-Sub 9-pin connector
Memory Function	Data can be stored and loaded in setting memory (setting data) and data memory (source/measurement). Setting memory This function saves/loads setting conditions. Up to 21 data items can be stored. Settings for (source/measurement) functions, ranges, generated values/measured values as well as setting mode conditions can be stored. Data memory This function saves source and measure values displayed. Up to 100 data items can be stored. Storage date/time, (source/measurement) functions, ranges and generated values/measured values can be stored. Stored data can be checked on the display of the main unit as well as via communication.

이름	파일 유형
CA150 Apps Notes	1.68 MB	다운로드
CA150 Apps Notes Spanish	1.43 MB	다운로드
External Dim	61 KB	다운로드
CA150 Bulletin	517 KB	다운로드

* 무단수집및 복재를 금합니다 .

상품정보고시

제품명	신호발생기 ,HANDY CALIBRATOR ,신호발생기 , CA150
판매가격	3,872,000원
브랜드	yokogawa
제조사	Japan