에이치와이산업

Measurement Range	0.65m-50m(1/100), 0.65m-100m(1/200)
Accuracy	±2cm±water depth x 1/1000
Recording Method	Linear recording memory storage
Recording Scale	1/100, 1/200; Optional: 1/50
Recording Form	Heat sensitive sheet(thermal type)
Size of Recording Form	Length 25m, width 112mm
Form Feeding Speed	15mm/min. ,30mm/min., 45mm/min., 60mm/min., 90mm/min., 120mm/min., 240m/min., 360m/min."
Transducer Frequency	200KHz±3KHz
Direction Angle of Transducer	Half value half angle, about 3 °
Adjustment for Angle	Automatic adjustment (manual adjustment also available)
Sound Velocity Correction	By every 1-meter increment for the range 1300~1599m/s
Range of Draft Adjustment	0.0~9.9m
Items Printed on Recording Chart	Time, water depth, correction value for sound velocity, and recording scale
Printout of Water Depth	RS-232C, 4800 baud rate, 8 bits, stop bit2
Output	20W
Oscillation Method	Transistor method
Depth Output	RS-232C
Power Supply	DC12V
PowerConsumption	12V, 0.65A
Operating Time	6 hours continuous
Dimensions(WxHxD)	363 x 256 x 120 mm
Weight	7 Kg(with built-in battery)
Accessories	Transducer, boardside fixture, charger, marker, 5 rolls of recording paper
Optional Item	Reflection plate for sound velocity correction

OS	Windows Mobile 5.0(Premium edition)
CPU	200 MHz or 400 MHz Intel PXA255 XScale®processor
RAM(volatile)	64 MB SDRAM
Flash Storage Memory (Nonvolatile)	128 or 256 MB of nonvolatile Flash storage
Display	240×320 pixel (1/4VGA) colorTFT with LED front light
Battery Life	15 hours continuous room temperature operation with default settings and no embedded radios
Battery Charging	Up to 12 hours to full charge (w/802.11 turned off)
Battery Capacity	3800 mAh NiMH rechargeable
I/O Ports	Power, RS-232C serial (9-pin) and USB client
Sound	Integrated sealed speaker and microphone
Expansion Ports	Optional 2 CF slots - Type I and Type II
Enviromental	Submersible, drop-resistant, dust-proof (see Environmental section)
Integrated Wireless Connectivity	Optional Integrated Bluetooth and 802.11g (Wireless LAN)capability

Temperature	Operation: -30 to + 60°C(-22 to+ 140°F) Storage: -40 to+ 70°C(-40 to+ 158°F)
Water	IP67, sealed against accidental immersion (submersible to 1 meter for 30 minutes) MIL-STD 810F, Method 512.4, Procedure 1
Drop	MIL-STD-810F, Method 516.5, Procedure IV 26 drops@1.22m(4ft.)onto plywood over concrete; 6 drops@-30°C(-22°F) 6 drops@60°C(140°F)
Sand and Dust	IP67, sealed against dust, MIL-STD 810F，Method 510.4, Procedures I and II
Vibration	MIL-STD 810F Method 514.5, Procedure I & II
Altitude	MIL-STD 810F, to 4572m(15,000 ft) at a nominal temperature of +23°C(+73°F) Method 500.4, Procedures I , II , & III
EMI	Meets FCC class B requirements

Size(WxHxD)	14.8×5.6×21.6cm
Receiver Weight	0.96kg(2.13 lb)
Keyboard and display	LCD backlight display 16 characters by 2 rows, 4 button keypad
Antenna Mounting	All accept 5/8"-11 UNC male bolt

Operating temperature	-30°C to+ 65°C(-22°F to+ 140°F)
Storage temperature	-34°C to+ 85°C(-29°F to+ 185°F)
Humidity	Complies with MIL 810E. Unit sealed to +/-5 PSID
Water	Waterproof and dustproof

Power	9V to 28V DC external power input with over-voltage protection
Power consumption	Nominal 350 mA at 12 V DC
Certification	Class B Part 15, 22, 24 FCC certification，CE mark approval, C-tick approval, WEEE

Receiver position update rate	1, 2, 5, 10 Hz
Correction Data Input and Output	CMR II, CMR+, RTCM2.1, RTCM 2.3, RTCM 3.0
RS232 Outputs	NMEA - GGA, GLL, GRS, GSA, GST, GSV, MSS， RMC, VTG, ZDA, various Proprietary NMEA TSIP format
CAN Outputs	J1939, NMEA 2000®

Size	15W X 6H X 13D cm
Weight	1kg
Material	Outer housing:#6063 extruded aluminum Lenses:Acrylic
Power Req	110v AC Adapter Standard
Power Req	12v DC Adapter Optional
Current Draw	200mA, typical
Beam Divergence	3 milliradians, nominal

Wave length	904 nm
Eye Safety	FDA Class 1

Sealing	NEMA 6, IP 67
Temperature	-30 to +60°C

Size/Spacing of bolt hole pattern

one 3 mm and one 4 mm hole separated by 12.8×3 cm, each side.

* 무단수집및 복재를 금합니다 .

상품정보고시

제품명	스팩
판매가격	가격문의