에이치와이산업 - 온도측정기

OFRA DTI050 - Reference Digital Temperature Indicator

JOFRA DTI050

Temperature range: -200 to 2500°C (-328 to 4532°F)

accuracy to ±0.01°C / ±0.018°F

The JOFRA DTI050 offers a measurement accuracy of +0.005˚C. Supplied with a JOFRA STS-050 ‘smart' temperature reference sensor, the unit becomes a fully traceable thermometer with excellent accuracy of measurement.

The JOFRA DTI050 handheld digital temperature indicator, offers a measurement accuracy of +0.005˚C. This simple to use instrument with a clear graphical display, offers great flexibility, being able to work with both ‘smart' and standard temperature sensors. A fast response time ensures precise monitoring of temperature stability and low drift reduces uncertainty of measurement between calibration intervals.

Supplied with a JOFRA STS-050 ‘smart' temperature reference sensor, the unit becomes a fully traceable thermometer with excellent accuracy of measurement. It can be used as the reference for accurate verification of temperature for both dry block and liquid bath temperature calibrators or for direct measurement of critical temperatures in a process environment.

Features for DTI050

Temperature range -200°C to 2500°C (-328 to 4532°F)
High accuracy 0,005°C
Intelligent detection technology, allowing the DTI050 to read the data from the sensor automatically
Selectable display resolution 0,1 - 0.01 or 0,001
RS232 interface as standard
Calibration software included (CON050 and JOFRACAL)

JOFRACAL calibration software
	JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermoswithes, pressure gauges and pressure switches.

JOFRACAL calibration software

JOFRACAL calibration software ensures easy calibration of RTD´s, thermocouples, transmitters, thermoswithes, pressure gauges and pressure switches. JOFRACAL software may be used with the well-known JOFRA temperature calibrators as well as with JOFRA pressure and signal calibrators. Furthermore JOFRACAL functions as a stand-alone product.

JOFRACAL software provides an entirely automatic calibration of sensors and a semi-automatic calibration of the complete process loop by means of a PC. The software handles the comparison between the process
readout value and the reference value; a measurement typically required within ISO9000, GMP, or HACCP systems. Additionally, this evaluation may be performed on-site without electrical interruption of the loop.

JOFRACAL is capable of performing pressure calibration as well as temperature calibration. JOFRACAL software controls the complete calibration procedure, stores the results and provides a calibration audit trail through hard-copy certificates. All calibration data are stored for each sensor to monitor drift and optimise recalibration intervals. A scheduler feature allows planning of future calibrations.

JOFRA instrument combinations

JOFRACAL can be used with JOFRA DPC-500, APC, CPC and IPI pressure calibrators, all JOFRA temperature calibrators, as well as JOFRA AMC900, ASC300 multi signal calibrators and the ASM-800 signal multi scanner. When used with JOFRA ASM-800 signal multi scanner, JOFRACAL can perform a simultaneous automatic calibration on up to 24 pressure or temperature devices at the same time.

STS-050 reference sensors
	The JOFRA DTI050 with an JOFRA STS temperature reference sensor is a fully traceable thermometer recommended as the reference instrument to verify true temperature in any type of temperature calibrator, liquid bath, or dry-block calibrator.

STS-050 reference sensors

The JOFRA DTI050 with an JOFRA STS temperature reference sensor is a fully traceable thermometer recommended as the reference instrument to verify true temperature in any type of temperature calibrator, liquid bath, or dry-block calibrator.

Use the JOFRA DTI050 and the STS probes as your working temperature reference in any calibration application or use the set-up directly for critical measurements in the process. The superior specifications, combined with a long history of reliability and low drift, make the JOFRA DTI050 and the JOFRA STS probes the perfect choice.

The graphical display makes it is easy to recognize the status of the instrument and take readings. The DTI050 also handles signals from 4-wire RTD's, TC's and thermistors.
Developed especially for the DTI050 reference indicator
Temperatur area from -50 to 400°C (-58 to 752°F)
High system acuracy to ±0.04°C (±0.072°F) including the JOFRA DTI050
Information stored in a memory chip in the intelligent sensor gives easy access to relevant data and avoid mistakes
Straight probes, 90° angled probes or cable probes, offers flexibility in test methods depending on the sensor-under-test
Accredited certificate up to 400°C delivered as standard

* 무단수집및 복재를 금합니다 .

상품정보고시

제품명	온도측정기
판매가격	가격문의
브랜드	AMETEK JOFRA
제조사	덴마크